Refer to your distribution's documentation for setup and usage instructions.ģ Scan supported means that PC initiated scan using a SANE compatible software application is supported over parallel, USB, or network (depending on I/O connection). You may mount the photocard as a storage drive over USB only. Please refer to the HPLIP FAQs for more information.Ģ USB mass storage only. Not all network configurations are supported. Alternatively, many devices may be operated on the network using an external JetDirect print server. I have had this printer hooked up to Ubuntu before, and it works out-of-the-box, so to speak.All information provided is believed to be accurate but is not guaranteed.ġ Network support indicates built-in ethernet and/or wireless networking. I would be very grateful if someone could direct me as to what I should do. Most of it is for GUI based stuff, but I don't have X on the server, so I am doing it all through the Web interface and SSH.

Can someone please point me in the right direction from here? I've been trying to find some reading to do on CUPS, but documentation is lacking. I am no printer tech, nor have been very successful at setting up printers before. I read through /var/log/cups/error_log and here is the output:Į Filter 'foomatic-rip' for printer 'hp_photosmart_7350_USB_1' not available: No such file or directoryĮ Resume-Printer: UnauthorizedĮ PID 20242 (/usr/lib/cups/filter/foomatic-rip) stopped with status 2! I tried to print a test page from the 'Print Test Page' button, and I find that the job is stopped. I went to the Printer tab, started the printer, (also, the printer is physically on, has paper in it.) I installed the PPD and added the printer successfully.

I then found that CUPS did not have a driver for my printer, so I searched the web for one. I went to Administration, it auto-detected the printer, I installed the printer. I hooked up a HP Photosmart 7350 to my server via USB, installed CUPS by running:

Install hp photosmart 7350 printer